7-10. Timing Belt Replacement
Replacement (Perform the part replacement according to the following
procedure.)
Removing the FG magnet cover
Removing the timing belt
Cleaning the pulley
Installing the timing belt
Installing the FG magnet cover
Adjustments after replacement
Timing belt tension adjustment
Capstan add-on recording adjustment
Preparations
1. Turn off the main power.
2. Open the inside panel. (Refer to Section 1-5.)
3. Removing the plug-in boards (Refer to Section 1-7.)
4. Removing the SS-92G board (Refer to Section 6-20.)
n
Timing belt can be replaced when the mechanical deck assembly attaches to the unit.
Tools
. Torque screwdriver bit (for M1.4) : J-6325-110-A
. Torque screwdriver (for 3 kg) :
J-6325-400-A
7-50
HDW-F900R/V1 (E)