Ctl Head Replacement - Sony HDCAM HDW-F900R Maintenance Manual

7-12. CTL Head Replacement

Replacement (Perform the part replacement according to the following
procedure.)
Removing the FE/CTL head assembly
CTL Head replacement
Installing the FE/CTL head assembly
Cleaning FE/CTL head assembly
Adjustments after replacement
Tape run adjustment
Video tracking adjustment
CTL head height adjustment
CTL head position adjustment
CUE/TC head position adjustment
c
The tape cleaner that is attached to the FE head has the cleaning blade.
The cleaning blade has the sharp edge that can cut your hands. Never touch the
cleaning blade with bare hands. Be careful also not to cut your hands during CTL
head replacement and adjustments.
Preparations
1. Check that the unit is in the unthreading-end state.
2. Turn off the main power.
3. Remove the front lid and outside panel assembly. (Refer to Section 1-4.)
n
The CTL head can be replaced when the cassette compartment attaches to the
unit.
Tools
. Torque screwdriver bit (for M2) : J-6325-380-A
. Torque screwdriver (for 3 kg) :
. Cleaning cloth :
. Cleaning fluid :
7-54
J-6325-400-A
3-184-527-01
9-919-573-01
HDW-F900R/V1 (E)