Removing The Dc In Connector; Connectors - Sony HDCAM HDW-F900R Maintenance Manual

6-7-6. Removing the DC IN Connector

1. Remove the two precision screws and remove the DC
IN connector.
6-7-7. Removing the DC OUT/HD SDI OUT

Connectors

1. Remove the cap BNC and DC out cap. Remove the
three precision screws and remove the DC OUT/HD
SDI OUT connector assembly in the direction of the
arrow.
2. Disconnect the coaxial cable from the BNC coaxial
cable hold washer.
3. Remove the coaxial cable, nut, and BNC coaxial cable
hold washer, and remove the HDSDI OUT connector
from the DC OUT bracket.
4. Remove the nut and washer. Remove the coaxial
connector converter from the OUT bracket.
5. Attach the new boards and the connectors by reversing
the steps of removal.
HDW-F900R/V1 (E)
DC IN connector
Precision screws
P2.6 x 5
DC OUT/HD SDI OUT
connector assembly
DC OUT cap
Precision screws
P2.6 x 5
BNC cap
Nut
Washer
DC OUT bracket
DC OUT
connector
HDSDI OUT connector
Coaxial cable
hold washer
Coaxial cable
Nut
Coaxial cable hold washer
Coaxial cable
6-15