Operation Procedure; Identifying Switches; How To Enter Vtr Maintenance Mode - Sony HDCAM HDW-F900R Maintenance Manual

11-2. Operation Procedure

11-2-1. Identifying Switches

Rotary
encoder
MENU ON/OFF switch
Use this switch to turn the VTR maintenance menu on and off. When the lid is closed, the switch is set in
the OFF position.
ON : The VTR maintenance menu is shown on the display.
OFF : The VTR maintenance menu is not shown on the display.
ESCAPE switch
Use this switch to return to the previous display.
Rotary encoder
Rotate : Rotate the rotary encoder to move the cursor in the direction of the arrow (→) to select the
desired item.
Press : Press the rotary encoder to set the selected item.

11-2-2. How to Enter VTR Maintenance Mode

1. Set the switch S1-1/AT-172 board to the ON position.
2. Set the MENU ON/OFF switch on the inside panel to the ON position to start up the maintenance
mode.
3. The TOP MENU display appears.
4. Select SERVICE and press the rotary encoder.
S <TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
. OPERATION
. PAINT
. MAINTENANCE
. FILE
. DIAGNOSIS
→
SERVICE
11-2
ESCAPE switch
MENU ON/OFF
switch
CANCEL/PRST
OFF
ON/SEL ESCAPE
ON
STATUS
MENU
OFF
HDW-F900R/V1 (E)