Sony HDCAM HDW-F900R Maintenance Manual page 249

5. Install the new RE-186 board and RE-187B board by
reversing the steps of removal.
m
. When connecting the RE-187B board to the connec-
tor, confirm that the projection of the board is
securely inserted into the slot on the outside of the
unit.
. When connecting the RE-186 board to the connec-
tor, confirm that the top of the board is securely
inserted into the cut-out on the outside of the unit.
n
When fixing the RE-187B board and RE-186 board with
the RE retainer (2), confirm the following points.
1. Confirm that the portions A (two locations) of each
circuit board are pressed by the flat surface of the RE
retainer (2).
2. Confirm that the portions B (two locations) of each
circuit board have entered into the holes of the RE
retainer (2).
3. Confirm that the connectors are securely inserted.
HDW-F900R/V1 (E)
Corner at the top
IF PC board retainer
RE-187B
board
Protruded
Projection
portion
in the bottom
Slot
Cut out
RE-186 board
RE retainer (2)
Hole
Flat surface
Hole
RE-186 board
RE-187B board
Outside of the unit
RE-186 board
RE-187B board
Outside of the unit
B
A
6-17