Sony HDCAM HDW-F900R Maintenance Manual page 404

Removal
1. Removing the mechanical deck
assembly
Loosen the five screws and remove the mechani-
cal deck assembly.
(Refer to Section 7-35.)
2. Removing the cleaning assembly
Remove the screw and remove the cleaning
assembly.
(Refer to Section 7-6.)
3. Removing the gear block assembly
Remove the three precision screws and remove
the gear block assembly.
(Refer to Section 7-24.)
4. Removing the timing belt
Remove the timing belt.
(Refer to Section 7-10.)
5. Removing the FG magnet cover
Remove the precision screw and step screw 2,
and remove the FG magnet cover.
(Refer to Section 7-36.)
6. Removing the capstan motor
(1) Remove the connector from the capstan
printed wiring board.
n
When the capstan motor removal is per-
formed with the mechanical deck assembly
removed, place a protection sheet under the
mechanical deck assembly.
7-132
Connector on the capstan motor board
Protection sheet
HDW-F900R/V1 (E)