Sony HDCAM HDW-F900R Maintenance Manual page 325

Removal
1. Removing the S or T idler assembly
Remove the stop washer and remove the S or T
idler assembly.
n
Do not remove the poly-washers that are inserted
under the S or T idler assembly, from the mount
shaft.
There are cases that the poly-washers are re-
moved together with the idler assembly when the
idler assembly is removed. Do not lose the poly-
washers.
Installation
2. Cleaning and applying oil to the
mount shaft
(1) Clean the mount shaft using a cleaning cloth
moistened with cleaning fluid.
(2) Apply a 1/4 drop of oil to the mount shaft.
3. Installing the S or T idler assembly
(1) Hold the new S or T idler assembly with its
white side facing up, and insert it to the
mount shaft.
(2) Install the new stop washer.
Adjustment after Replacement
4. Capstan add-on recording Adjustment
(Refer to Section 10-5-3.)
HDW-F900R/V1 (E)
S idler
Stop washer
assembly
Recessed portion
Stop washer
Mount shafts
(Apply oil after cleaning)
Poly washers
(Do not remove it)
White side face
White side face
Recessed
portion
T idler
assembly
Poly washer
7-53