Sony HDCAM HDW-F900R Maintenance Manual page 184

VA ADJUST Display (Adjusting the video amplifier system)
? 03 O VA ADJUST
R AD LEVEL
G AD LEVEL
B AD LEVEL
PREKNEE ADJ MODE:
R PRE KNEE
G PRE KNEE
B PRE KNEE
OUTPUT SELECT
TEST SAW
TEST SAW H LEVEL:
Item
R AD LEVEL
G AD LEVEL
B AD LEVEL
PREKNEE ADJ MODE
*2
P PRE KNEE
G PRE KNEE *2
B PRE KNEE *2
OUTPUT SELECT
TEST SAW
TEST SAW H LEVEL
*1 : RGB can be selected only when the Camcorder is used in the service mode.
*2 : "DCC OFF" and "DCC ON" have their own preknee level adjustment values. When the adjustment value of "DCC ON" is activated,
"DCC" is displayed on the right-most side of the menu item.
4-68
: 0
: 0
: 0
OFF
: 0
: 0
: 0
: Y
: OFF
0
Setting Function
(_99 to 99) Adjusts gain of the R-channel video signal that is input to
A/D converter.
(_99 to 99) Adjusts gain of the G-channel video signal that is input to
A/D converter.
(_99 to 99) Adjusts gain of the B-channel video signal that is input to
A/D converter.
OFF/ON Turns ON/OFF the function to adjust preknee.
(_99 to 99) Adjusts preknee of the R-channel video signal.
(_99 to 99) Adjusts preknee of the G-channel video signal.
(_99 to 99) Adjusts preknee of the B-channel video signal.
Y/R/G/B/RGB *1 Selects the video signal that is output from the TEST OUT
and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when VBS is
selected in the SD REAR BNC OUT of the OUTPUT SEL
display (of the OPERATION menu) and SD is selected in
the TEST OUT SELECT.) The output signal returns to the
Y-signal without fail at power-on.
OFF/ANALOG/DIGITAL Turns ON/OFF the function that outputs the TEST signal
forcibly to the video signal system, and selects the type of
TEST signal. (Invalid when the BARS signal is selected.)
(_99 to 99) Adjusts the amplitude of the rectangular signal that is
located in the right of the TEST SAW.
HDW-F900R/V1 (E)