Sony HDCAM HDW-F900R Maintenance Manual page 183

SP FUNC Display (Setting the special functions)
? 02 O SP FUNC
COMP OUT ENABLE :
CHARA 4:3 MODE
VF ZEBRA FORM
BATT REMAIN DISP:
GAIN DISP MODE
ARIB STRAIP
Item Setting
COMP OUT ENABLE OFF/ON
CHARA 4 : 3 MODE OFF/ON
VF ZEBRA FORM 1/2/3
BATT REMAIN DISP 1/2/3
Remaining power
indication on the
LCD DISPLAY PANEL
Remaining power
indication to VF (%)
GAIN DISP MODE dB/ISO
ARIB STRAIP IDEAL/EVEN/MOD
* : Detected by the DC voltage.
HDW-F900R/V1 (E)
OFF
: OFF
: 1
1
: dB
: EVEN
Function
Sets this menu item to ON when the component signal
unit is connected.
Turns ON/OFF the function that adjusts the width of
character into the cut-out width of the 4 : 3 aspect ratio.
Switches the ZEBRA pattern to be displayed in VF.
*
Switches the mode for indicating the remaining power of
battery.
"Sony" indicates the item that corresponds to <Sony Info> or
<Sony> in "Maintenance: Battery Page". "Others" indicates the
item that corresponds to <Others, EXT DC>.
Sony
Others
Info
communication
Other than Info
*
communication
Turns ON/OFF the function that sets the GAIN value in the
ISO indication.
ISO : ISO indication
dB : Decibel (dB) indication
n
Correspondence between the ISO indication and decibel (dB)
indication in 59.94i/50i is shown below.
Values in parenthesis ( ) indicates the decibel (dB) indication.
440 (_3) /630 (0) /880 (3) /1250 (6) /1770 (9) /2500 (12) /
5000 (18) /10000 (24) /20000 (30) /40000 (36) /80000 (42)
In 23.98PsF/24PsF/25PsF/29.97PsF, the sensitivity is
reduced in half, so the values on each ISO indication also
become half.
Selects the stripe width of the internal color bar signal that is
output when the extension board HKDW-905R is installed.
IDEAL : Ideal width
EVEN : Even number width
MOD : Modified width
1 2
←
Info/voltage %
approximate
Tester display Voltage %
approximate
←
Sony only
←
Others only
3
←
←
←
Sony/Others
4-67