Sony HDCAM HDW-F900R Maintenance Manual page 129

MARKER 1 Display (Setting the MARKER)
? 08 O MARKER 1
MARKER
CENTER
CENTER MARK
SAFETY ZONE
SAFETY AREA
ASPECT
ASPECT SELECT
ASPECT MASK
ASPECT MASK LVL :
100% MARKER
Item Setting
MARKER OFF/ON
CENTER OFF/ON
CENTER MARK 1/2/3/4
SAFETY ZONE OFF/ON
SAFETY AREA 80/90/92.5/95%
ASPECT OFF/ON
ASPECT SELECT 14 : 9/13 : 9/4 : 3/1.85/2.35
ASPECT MASK OFF/ON
ASPECT MASK LVL 0 to 8
100% MARKER OFF/ON/SD
*1 : The CENTER MARKER is displayed as shown below.
Setting
1
VF
screen
*2 : 100% MARKER : SD is displayed only when the HKDW-702/902R is installed.
n
MARKER or ZEBRA is not output to the TEST OUT terminal when "TEST OUT SELECT" is set to SD
and "DOWN CON MODE" to CROP on the OUTPUT SEL screen.
HDW-F900R/V1 (E)
: OFF
: OFF
: 3
: OFF
: 90%
: OFF
: 4:3
: OFF
0
: OFF
*2
2
Function
Turns ON/OFF all the MARKER display functions.
Turns ON/OFF the CENTER MARKER display.
Selects the types of CENTER MARKER when the
above CENTER MARKER display is ON.
Turns ON/OFF the SAFETY ZONE MARKER
display.
Selects the ranges of the SAFETY ZONE
MARKER display.
Turns ON/OFF the ASPECT MARKER display.
Selects the aspect ratio
1.85 : 1.85 : 1
2.35 : 2.35 : 1
Turns ON/OFF the function to darken the outside
of the specified aspect.
n
This setting is effective in the VF output only.
Selects the darkness level of the outside of the
specified aspect when ASPECT MASK is ON.
n
This setting is effective in the VF output only.
Selects the 100% (effective picture elements)
MARKER display.
3
OFF : 100% marker OFF.
ON : HD 100% marker display
SD : SD 100% marker display
*1
4
4-13