Video Head - Sony HDCAM HDW-F900R Maintenance Manual

7-6. Replacement of AHC Roller Assembly for Video Head
Replacement (Perform the part replacement according to the following
procedure.)
Removing the cleaning assembly
Replacement of AHC roller assembly for video head
Installing the cleaning assembly
Operation check
Note
When replacing the cleaning assembly, be careful not to touch the video head.
Preparations
1. Check that the unit is in the unthreading-end state.
2. Turn off the main power.
3. Remove the front lid and the outside panel assembly. (Refer to Section 1-4.)
n
In order to replace the AHC roller assembly, the new CR spacer is required.
Prepare the new CR spacer (3-182-765-02) when replacing the AHC roller assem-
bly.
n
The cleaning assembly can be replaced when the cassette compartment attaches to
the unit.
7-38
HDW-F900R/V1 (E)