4. Select the desired ROM that you want to upgrade the version. Then press the rotary encoder. The
following confirmation message appears as follows.
When a newer version than the current version is read :
When the same version as the current version is read :
When an older version than the current version is read :
03
O
ROM VERSION
VERSION UP OK?
→
AT
: Ver 1.00
SS
: Ver 1.00
FP
: Ver 1.00
AU DSP: Ver 1.00
EQ
: Ver 1.00
5. Selecting YES and pressing the rotary encoder starts upgrading of the selected ROM version.
6. In the case of the ROM on the AT-172 board:
(1) The following displays to execute the version upgrade appear.
n
Never remove a Memory Stick or never turn off the main power until the message "COMPLETE"
appears.
AT version up!
(2) Within several seconds, the following message appears.
Writing...1.01 001
1 / 4
(3) Within five seconds, the following message appears.
-------Complete-------
* Power off *
1-60
VERSION UP OK?
SAME VERSION OK?
→
YES NO
1.01
The dislay is switched in an instance.
"
Initializing...
"
Checking...
"Reading ROM data ..."
←
Flashing
The dislay is switched in about five seconds.
"
"
←
Flashing
VERSION DOWN OK?
"
↓
"
↓
3 / 4
"
↓
4 / 4
"
HDW-F900R/V1 (E)