8. Install the new rotary encoder by reversing the steps of
removal.
m
. When installing the ENC-61 board to the inside
panel assembly, assemble the sleeve (ENC1) and the
earth plate as shown in Fig. 1.
. Insert the protruded portion of the rotary encoder
into the square hole of the sleeve (ENC1) and at the
same time, align the protruded portion of the sleeve
(ENC1) with the groove the of inside panel assem-
bly.
6-12
Protruded
Earth plate
portion
Protruded
Square hole
portion
Sleeve (ENC1)
Fig.1
Earth plate
Protruded
portion
Groove
Sleeve (ENC1)
Square hole
Earth plate
Protruded
portion
ENC-61 board
Square
hole
Rotary encoder
HDW-F900R/V1 (E)