Volume Controls Replacement - Sony HDCAM HDW-F900R Maintenance Manual

6-4. Shutter, AUTO W/B BAL Switch and
AUDIO Volume Controls
Replacement
1. Remove the front assembly.
(Refer to Section 6-1.)
2. Loosen the two screws fixing the harness (lens) and
remove the three screws from the front SW cover
assembly.
3. While removing the groove of the SW-1031 board
from the front assembly, remove the front SW cover
assembly.
4. Disconnect the harness from the connector (CN1) on
the SW-1031 board.
5. Remove the two screws and remove the SW-1031
board from the front SW cover assembly.
n
The VTR START switch is equipped with the cushion.
Be careful not to lose the cushion.
6. Remove the soldering. Remove the shutter switch,
AUTO W/B BAL switch and AUDIO volume con-
trols.
6-8
Front assembly
Precision
screws
P2.6 x 5
Harness (lens)
Front SW cover
assembly
Precision screws
P2.6 x 5
Front SW cover assembly
Shield plate (FR)
VR (audio) knob
AUTO W/B BAL
switch
Audio volume
control
SW-1031 board
Groove on the
SW-1031 board
Shutter switch
Cushion
VTR start
switch
PTP2.6 x 8
CN1
HDW-F900R/V1 (E)