Sony HDCAM HDW-F900R Maintenance Manual page 162

DCC ADJUST Display (Setting the DCC function)
? 13 O DCC ADJUST
DCC FUNCTION SEL:
DCC D RANGE
DCC POINT
DCC GAIN
DCC DELAY TIME
PREKNEE POINT
Item
DCC FUNCTION SEL
DCC D RANGE
DCC POINT
DCC GAIN
DCC DELAY TIME
PREKNEE POINT
4-46
DCC
: 600%
: 0
: 0
: 0
: AUTO
Setting
DCC/FIX
400/450/500/550/600 (%)
(_99 to 99)
(_99 to 99)
(_99 to 99)
AUTO/FIX
Function
Selects the DCC function modes when the DCC
switch is ON.
DCC : Normal mode
FIX : The knee correction is performed with the
dynamic range fixed to 600%.
Sets the dynamic range when the DCC switch is
set to ON.
Sets the minimum knee point when the DCC switch is
set to ON.
Sets the knee slope when the DCC switch is set to ON.
Sets the response speed of DCC. (Increasing the data
slows down the response speed.)
Selects the mode of preknee.
AUTO : Has the dedicated preknee point when the
DCC switch is set to OFF.
FIX : Even when the DCC switch is set to OFF, the
preknee point is the same as when the DCC
switch is set to ON.
HDW-F900R/V1 (E)