Special Saving Items; White Gain - Sony HDCAM HDW-F900R Maintenance Manual

5-8. Special Saving Items

5-8-1. White Gain

Using the ALL file
Executing item
ALL FILE SAVE
(FILE menu/ALL FILE page)
ALL FILE LOAD
(FILE menu/ALL FILE page)
STORE ALL PRESET
(FILE menu/ALL page)
CLEAR ALL PRESET
(FILE menu/ALL FILE page)
ALL PRESET
(FILE menu/ALL FILE page)
Using the REFERENCE file
Executing item
REFERENCE STORE (FILE menu/REFERENCE page)
REFERENCE CLEAR (FILE menu/REFERENCE page)
PRESET of the setup value
(FILE menu/REFERENCE page)
Using the SCENE file
. When "SCENE WHITE DATA" is set to ON using the [REFERENCE] display
Executing item
SCENE STORE (FILE menu/SCENE FILE page)
SCENE RECALL (FILE menu/SCENE FILE page)
SCENE STANDARD (FILE menu/SCENE FILE page)
. When "SCENE WHITE DATA" is set to OFF using the [REFERENCE] display
Executing item
SCENE STORE (FILE menu/SCENE FILE page)
SCENE RECALL (FILE menu/SCENE FILE page)
SCENE STANDARD/CANCEL
(FILE menu/SCENE FILE page)
5-18
Status after execution
All the values of the white gain are saved in the ALL FILE. (Filter A/B/C/D, WHITE BAL A/B)
All the values of the white gain are overwritten to the value of ALL FILE.
(Filter A/B/C/D, WHITE BAL A/B)
The value of the preset white gain specified on the MAINTENANCE menu/PRESET WHT page
is saved as the value of the PRESET layer (identical to the value of the REFERENCE FILE).
All the values of the white gain are overwritten to the factory default value.
(Filter A/B/C/D, WHITE BAL A/B)
The PRESET WHITE R/B GAIN is also changed to the factory default value.
All the values of the white gain are overwritten to the value of PRESET layer.
Status after execution
The white gain values during execution are saved.
(When the WHITE BAL switch is in A, the value of A is saved. When it is in B,
the value of B is stored. When it is in PRST, the value of PRST is stored.)
The white gain value that is assigned by the [PRESET WHT] display with the
WHITE BAL switch being set in PRST, is saved.
Both R/B GAIN values are set to 0 (3200K).
The value returns to the REFERENCE file value.
Status after execution
The white gain values during execution are saved.
(When the WHITE BAL switch is in A, the value of A is saved. When it is in B,
the value of B is stored. When it is in PRST, the value of PRST is stored.)
The white gain value that is assigned by the [PRESET WHT] display with the
WHITE BAL switch being set in PRST, is saved.
The white gain values during execution are replaced by the SCENE file
values. However, when "RECALL" is executed with the WHITE BAL switch
being in the PRST position, the values are not replaced.
The white gain values during execution become the REFERENCE file values.
Status after execution
The white gain values during execution are saved.
The white gain values are not rewritten.
The PRESET value and the white gain values during execution are not
replaced.
HDW-F900R/V1 (E)