Sony HDCAM HDW-F900R Maintenance Manual page 392

18. Cleaning the mount shaft of eject link
assembly
Clean the mount shaft using a cleaning cloth
moistened with cleaning fluid.
n
After cleaning, be sure to wipe the cleaning fluid
off the cleaned portions using a dry cleaning
cloth.
19. Applying grease to the mount shaft
Apply grease to the mount shaft of the eject link
assembly.
20. Applying oil to the joint block
Apply a 1/4 drop of oil to the joint block of the
eject link assembly.
21. Installing the eject link assembly (B)
(1) While inserting the brake link shaft of the
eject link assembly into the groove of the
cam gear assembly as shown, install it to the
two shafts of the mechanical deck assembly.
(2) Install the two new stop washers.
22. Installing the eject link assembly (A)
(1) While aligning the link shaft of the eject link
assembly (A) with the shaft mechanical deck
assembly, install it.
(2) Install the new stop washer.
23. Cleaning the mount shaft of the F link
assembly
Clean the mount shaft using a cleaning cloth
moistened with cleaning fluid.
n
After cleaning, be sure to wipe the cleaning fluid
off the cleaned portions using a dry cleaning
cloth.
24. Applying oil to the roller
Apply a 1/4 drop of oil to the roller of the F link
assembly.
25. Installing the F link assembly
(1) While inserting the link (A) shaft of the F
link assembly with the groove of the cam
gear assembly as shown, install it to the
frame shaft.
(2) Install the new stop washer.
7-120
Joints of eject link assembly (B)
(Apply oil)
Stop washer
Stop washer
Eject link
assembly (A)
Link shaft
of eject link
assembly (B)
Shaft of mechanical
deck assembly
Stop washer
Brake link shaft of
F link assembly (B)
Stop washer
Roller of F link
assembly
(Apply oil)
Link (A) shaft of
F link assembly
Mount shaft
(Apply grease after cleaning)
Mount shaft
(Apply grease after cleaning)
HDW-F900R/V1 (E)