Sony HDCAM HDW-F900R Maintenance Manual page 256

10. Remove the two screws. While removing the MS lid
assembly in the direction of the arrow, disconnect the
flexible card wire from through the hole.
n
Life of flexible card wire will be significantly short-
ened if it is folded. Be very careful not to fold the
flexible card wire.
11. When installing the new MS lid assembly into the
inside panel assembly, insert the flexible card wire into
the hole first. Then, while pressing the protruded
portion of the MS lid assembly against the sponge on
the back of the MS knob (open), insert it into the
inside panel assembly.
6-24
P1.7 x 2.5
Hole
Flexible card wire
Inside panel assembly
Hole
Flexible card wire
MS lid assembly
MS knob
(open)
Sponge
Protruded portion
MS lid assembly
HDW-F900R/V1 (E)