1-8. Notes on Replacement of Circuit Board
1-8-1. EEPROM Data
The table below lists data retained in the EEPROM (FRAM) on respective boards.
n
Do not replace the EEPROM ICs listed in the table because they retain board-specifi c data.
The part number listed in "Spare Parts" is for EEPROM which is not programmed. If replacement is
needed, contact your local Sony Sales Offi ce/Service Center.
Board
CD-61
DPR-298
NR-80
SY-363
TG-265
1-8-2. Actions to Be Taken during Board Replacement and after Board Replace-
ment/Repair
Board
NR-80 (IC5)
SY-363
TG-265 (IC214)
TX-126
HXC-100/V1 (E)
Ref No.
IC706
IC1002
IC905
IC906
IC5
IC127
IC203
IC206
IC118
IC119
IC201
IC214
Action
3-3-6. RPN Adjustment
3-6. RPN Compensation
Refer to Section 1-8-3.
3-3-1. BLACK SET Adjustment
3-3-2. Sensitivity Adjustment
3-3-3. V-SUB Adjustment
3-3-4. Black Shading Adjustment
3-3-5. White Shading Adjustment
3-5. ND Offset Adjustment
OHB fi le re-setting
3-8. TRIAX Transmission System Adjustment
Stored data
PLD data
PLD data
PLD data
PLD data
RPN compensation data
Board adjustment data and paint data
PLD data
PLD data
Software, program
Software, program
PLD data
CCD adjustment data
1-25