Sony HDCAM HDW-F900R Maintenance Manual page 395

(2) Remove the FL-283 printed wiring board
from the connector (CN1) on the CCM-45G
board.
n
Life of the FL-283 printed wiring board is
significantly shortened if folded. Be careful
not to fold it.
(3) While removing the cable retainer 2 from the
notch, remove the FL-283 printed wiring
board and remove it.
(4) Loosen the five hexagon hole bolts (with
drop-safe) completely with hexagon bit.
HDW-F900R/V1 (E)
FL-283 printed wiring board
CCM-45G board
CN1
Hexagon hole bolt
(M2 x 8) (with drop safe)
Hexagon hole bolt
(M2 x 8) (with drop safe)
Cable retainer 2
Notch
Hexagon hole bolt
(M2 x 8) (with drop safe)
Hexagon hole bolts
(M2 x 8) (with drop safe)
7-123