6-22. LP-114 Board Replacement
6-22. LP-114 Board Replacement
1. Remove the precision screw (P2.6 x 5) and
remove the rear cover assembly in the
direction of the arrow.
m
. Be careful not to lose the washer.
. The two drop protections are not fixed. Be
careful not to lose it.
2. Disconnect the harness from the connector
(CN116) on the LP-114 board.
3. Remove the two precision screws (P1.4 x
3.5) and remove the LP shield plate and the
LP-114 board.
n
Be careful not to lose the LP shield plate.
4. Install the new LP-114 board by reversing the
steps of removal.
6-36
Precision screw
P2.6 x 5
Washer
Rear cover assembly
LP shield plate
LP-114 board
CN116
Drop protection
(SW) (washer)
Drop protection
(TALLY)
Precision screws
P1.4 x 3.5
HDW-750/750CE V1