Filter Knob Position Adjustment - Sony HDCAM HDW-F900R Maintenance Manual

1-20. Filter Knob Position Adjustment

n
Procedure of the filter knob position adjustment is different
depending on the type of the incorporated filter.
1. Move the mount lever in the direction of the arrow and
remove the mount cap.
n
Be very careful not to touch the filter surface when the
mount cap is removed.
Mount cap
1-56
2. Rotate the knob shaft (thick) until the filter of the
thinnest color is visible from the front.
3. Align the file (CC) knob number "B" with the mark on
the inside panel assembly and attach it with the use of
the two stop screws (A).
4. Rotate the knob shaft (thin) until the filter of the
thinnest color is visible from the front.
5. Align the file (ND) knob number "1" with the mark on
the inside panel assembly and attach it with the use of
the two stop screws (B).
Stop screws (B)
WP2 x 3
Filter (ND)
knob
Mount
Stop screws (B)
lever
WP2 x 3
1
Filter (ND) knob
n
Standard tightening torque :
WP2 x 3 : 20 to 25 x 10
WP3 x 3 : 53 x 10
Knob shaft (thick)
Knob shaft (thin)
Stop screw (A)
WP2 x 3
1 B
Stop screw
(A) WP2 x 3
Filter (CC) knob
Inside panel assembly
-2
N.m (2 to 2.5 kgf.cm)
-2 N.m (5.3 kgf.cm)
Mark
HDW-F900R/V1 (E)