Sony HDCAM HDW-F900R Maintenance Manual page 339

Installation
2. Installing the (S) soft brake assembly
(1) Align the position-setting pin and the posi-
tion-setting hole of the mechanical deck
assembly, and fix it with two screws.
The standard tightening torque value :
_2
10 x 10 N.m (1 kgf.cm)
n
Check that the S soft brake assembly arm is
pressing the band as shown.
Adjustment after Replacement
3. Capstan add-on recording adjustment
(Refer to Section 10-5-3.)
HDW-F900R/V1 (E)
Position-setting hole
Position-setting pin
Mechanical deck
assembly
S soft brake
Precision screws
P1.4 x 3.5
(S) soft brake
assembly
S reel table assembly
Band
7-67