Ccm-45G Board; Fp-152 Board; Eq-88G Board; Ifa-19G Board - Sony HDCAM HDW-F900R Maintenance Manual

1-17-10. FP-152 Board

Adjustment Items when Board is Replaced
System control adjustment and setting
Setting the data and time of internal watch
(For the setting procedure, refer to " 4-8. TIME/DATE
Display".)
10-4-1. Voltage Correction Adjustment
Audio system alignment
10-2-1. Audio A/D Error Adjustment
10-2-2. Audio D/A Error Adjustment
10-2-3. AUDIO LEVEL Volume Control (Inside Panel)
Adjustment
10-3-2. CUE Playback Level Adjustment
10-3-4. CUE Record Level Adjustment-1
10-3-5. CUE Record Level Adjustment-2

1-17-11. EQ-88G Board

The EEPROM (IC1104) is installed in the EQ-88G board.
Implement the following adjustments when this IC is
replaced.
Adjustment Item when the Board is Replaced
RF System Adjustment
10-6-1. RF System Continuous Automatic Adjustment
10-6-2. Saving the RF System Adjustment Data
10-6-3. PB Channel Condition Check
10-6-4. REC Channel Condition Check

1-17-12. CCM-45G Board

Adjustment Item when the Board is Replaced
10-4-2. Antenna Tuning Frequency Adjustment
HDW-F900R/V1 (E)

1-17-13. IFA-19G Board

EEPROM replacement
The EEPROM (IC202) is installed in the IFA-19G board.
When the IFA-19G board is replaced, remove IC202 from
the former board and reinstall it to the new replacement
IFA-19G board.
n
The initial data for this model cannot be written into the
new EEPROM (IC202) outside the factory.
When IC202 needs to be replaced due to defective IC,
contact your local Sony Sales Office/Service Center.

1-17-14. DC-110A Board (HKDW-702)

Check if it performs correctly after replacing the DC-110A
board. (Refer to Section 1 of the HKDW-702 Installation
Manual.)

1-17-15. DC-139 Board (HKDW-902R)

Check if it performs correctly after replacing the DC-139
board. (Refer to Section 1 of the HKDW-902R Installation
Manual.)

1-17-16. PM-23 Board (HKDW-905R)

Check if it performs correctly after replacing the PM-23
board. (Refer to Section 1 of the HKDW-905R Installation
Manual.)
1-53