Sony HDCAM HDW-F900R Maintenance Manual page 135

AUDIO STATUS Display (Indicating the setup status on audio)
AUDIO STATUS
EMPHASIS:OFF NDF
CH1:FRONT CH3:WIRELES
CH2:REAR CH4:WIRELES
∞ 40 30
20
CH1:
CH2:
CH3:
CH4:
Item
EMPHASIS
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
TEST OUT Display (Setting on TEST OUT and return video)
? 16 TEST OUT
O
TEST OUT MARKER :
TEST OUT VFDISP :
TEST OUT MENU
TEST OUT ZEBRA
OUTPUT SELECT
Item
TEST OUT MARKER
TEST OUT VFDISP
TEST OUT MENU
TEST OUT ZEBRA
OUTPUT SELECT
* : RGB can be selected only when the Camcorder is used in the service mode.
n
MARKER or ZEBRA is not output to the TEST OUT terminal when "TEST OUT SELECT" is set to SD
and "DOWN CON MODE" to CROP on the OUTPUT SEL screen.
HDW-F900R/V1 (E)
STEREO
10 0
OV
Function
Displays the EMPHASIS, DF/NDF, and FRONT MIC MONO/STEREO setting.
Displays the input signals of CH1 to CH4.
Displays the input signal level of CH1 to CH4. (When the input signal overflows,
OV is displayed.)
OFF
OFF
: OFF
: OFF
: Y
Setting Function
OFF/ON Turns ON/OFF the function to output the VF marker to the
TEST OUT terminal.
OFF/ON Turns ON/OFF the function to output the characters that
appear on VF, to the TEST OUT terminal when the VF's
DISPLAY switch is set to ON.
OFF/ON Turns ON/OFF the function to output the menus that appear
on VF, to the TEST OUT terminal when the MENU ON/OFF
switch is set to ON.
OFF/ON Turns ON/OFF the function to output the zebra pattern to the
TEST OUT terminal.
Y/R/G/B/RGB * Selects the video signal that is output from the TEST OUT and
the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when VBS is selected
in the SD REAR BNC OUT of the OUTPUT SEL display (of
the OPERATION menu) and SD is selected in the TEST OUT
SELECT.) The output signal returns to the Y-signal without fail
at power-on.
4-19