Sony HDCAM HDW-F900R Maintenance Manual page 125

FUNCTION 2 Display (Setting the various functions)
? 03 O FUNCTION 2
5600K
WHITE SWITCH <B>:
SHOCKLESS WHITE :
ATW SPEED
LOW LIGHT
LOW LIGHT LEVEL :
VF BATT WARNING :
PB VIDEO
ABS (VF MENU)
Item
5600K
WHITE SWITCH <B>
SHOCKLESS WHITE
ATW SPEED
LOW LIGHT
LOW LIGHT LEVEL
VF BATT WARNING
PB VIDEO
ABS (VF MENU)
HDW-F900R/V1 (E)
: OFF
MEM
1
: 4
: OFF
0
10%
: ALL
: OFF
Setting Function
OFF/ON Turns ON/OFF the function that electrically applies a 5600K color
temperature filter.
MEM/ATW Sets the following modes when the WHITE BAL switch is set
to the B (B-CH) position.
ATW : Auto Tracking White-balance
MEM : Automatic white balance
OFF/1/2/3 Turns ON/OFF the function that smooths out the transition of
white balance when the WHITE BAL switch is operated. It also
sets the transition time of white balance. 1 (Fast) ↔ 3 (Slow)
1/2/3/4/5 Switches the tracking speed of ATW.
1 (Fast) ↔ 5 (Slow)
OFF/ON Turns ON/OFF the LOW LIGHT message display function in VF.
(It displays the warning message on screen when the average
picture level decreases below a specific level.)
(_99 to 99) Sets the video level to start displaying the LOW LIGHT
message when the above LOW LIGHT message display
function is ON.
Reference : When a menu is being displayed on screen,
10%/20% Sets the percentage below which the display blinks when the
remaining battery level is displayed in % on the VF DISP.
ALL/HD SDI Can output camera images by limiting output destinations of
playback images at the time of PB.
ALL : Outputs PB VIDEO to VF, TEST OUT, REAR BNC, and
HD SDI.
HDSDI : Outputs PB VIDEO to the HD SDI terminal only.
OFF/ON Displays the menu items that are displayed in relative values in
definite values.
(The values of the applicable items are inverted.)
the character "L" is displayed instead of the
message "LOW LIGHT".
(Example) LOW LIGHT LEVEL: L 0
4-9