Sony HDCAM HDW-F900R Maintenance Manual page 166

GENLOCK Display (Setting on GENLOLCK input terminal)
? 16 O GENLOCK
GENLOCK
RETURN VIDEO
GL H PHASE COASE:
GL H PHASE FINE :
Item
GENLOCK
RETURN VIDEO
GL H PHASE COASE
GL H PHASE FINE
ND COMP Display (ND OFFSET compensation)
n
When only a single filter is used, this menu is not displayed.
? 17 O ND COMP
ND OFFSET ADJUST:
CLEAR ND OFFSET :
****ND ADJUST MODE****
ND1:YET ND2:YET
ND3:YET ND4:OK
Item
ND OFFSET ADJUST
CLEAR ND OFFSET
ND ADJUST MODE
ND1 to 4
4-50
: ON
: OFF
0
0
Setting
OFF/ON
OFF/ON
(_99 to 99)
(_99 to 99)
OFF
EXEC
Setting
OFF/ON
Press the rotary encoder to
execute this menu item.
_
Display only
Function
Turns ON/OFF the function that synchronizes the
internal reference signal with the video signal that is
connected to the GENLOCK terminal.
Turns ON/OFF the function to display the camera
return signal on VF when the RET button on the lens
is pressed.
GENLOCK phase adjustment (coarse adjustment)
GENLOCK phase adjustment (fine adjustment)
Function
Turns ON/OFF the ND OFFSET adjustment mode.
Returns the ND OFFSET value to the default value
when manufactured in the production plant.
ND OFFSET message display area
OK : The filter on which the white balance automatic
adjustment is already completed.
YET : The filter on which the white balance automatic
adjustment is not completed yet.
(When the main power is turned off or then the above
CLEAR ND OFFSET is performed, all displays
change to YET.)
This item is displayed when above ND OFFSET
ADJUST is set to ON.
HDW-F900R/V1 (E)