Sony HDCAM HDW-F900R Maintenance Manual page 380

7. Removing the S slider assembly
Slide the S slider back toward rear and remove
the S slider assembly from the S rail.
Installation
8. Installing the S slider assembly
Insert the pins of the new S slider assembly into
the groove of the S rail in the order starting from
pin 1 through pin 5 until the S slider assembly is
inserted in the S rail holder.
m
. Do not make mistake of the order of pins when
inserting the them. (The tape guide S2 must be
located before the tape guide S1.)
. Do not apply excessive force to the S slider
assembly and to the S rail.
. After they are installed, check that the pin
heads have not come out off the S rail groove.
7-108
S2 tape guide
S rail
S slider assembly
S2 tape guide
(plastic roller)
S rail
Pin 2
Pin 1
Holder
S1 tape guide
S slider
assembly
Pin 5
Pin 4
Pin 3
HDW-F900R/V1 (E)