Sony HDCAM HDW-F900R Maintenance Manual page 55

11. Connect the connector (CN1) on the SS-EXT assem-
bly to the connector (CN102) on the MB-1096 board.
12. Connect the flexible card wires (45 core) that come
from the connectors (CN101 and CN102) on the SS-
EXT assembly, to the connectors (CN201 and CN202)
on the MDC-13G board.
MDC-13G board
CN202
CN201
CN102
MB-1096 board
SS-EXT assembly
13. Connect the connector (CN102) on the SS-92G board
to the connector (CN1) on the SS-EXT assembly.
14. Connect the flexible card wires (45 core) that come
from the connectors (CN201 and CN202) on the SS-
EXT assembly, to the connectors (CN201 and CN202)
on the SS-92G board.
Flexible card wires
(45 core)
SS-EXT
assembly
CN202
CN201
HDW-F900R/V1 (E)
Flexible card wires
(45 core)
CN102
CN101
CN1
CN201
CN202
SS-92G board
CN102
CN1
SS-EXT assembly
1-15-10. Extending the RP-131 Board
(When you want to check the B side
or the A side of the PA-340 board)
Required tool : RP extension assembly
1. Remove the outside panel assembly.
(Refer to Section 1-4.)
2. Remove the three screws and remove the RP-131
board.
RP-131 board
Precision screws
P1.4 x 3.5
3. Connect the RP extension assembly to the RP-131
board and to the PA-340 board as shown in the
illustration.
RP-131
CN1
board
CN1
RP extension
assembly
RP extension
assembly
CN1
CN1
PA-340 board
1-45