Sony HDCAM HDW-F900R Maintenance Manual page 510

5 5 5 C004 : DRUM/CAP MOTOR STS 5 5
Indicates the operating status of drum motor and capstan motor.
n
In order to let the capstan motor enter the "LOCK" state, a cassette
tape on which the CTL signal is already recorded, must be played
back.
Playback an appropriate cassette tape on which the CTL signal is
already recorded, or playback the alignment HR2-1A (Part No. 8-960-
076-11) or HR5-1A (Part No. 8-960-076-01).
1. Select "C004 : DRUM/CAP MOTOR STS" and press the rotary
encoder.
2. The operating status of drum motor and capstan motor are
displayed on display.
<Status of each motor>
When stopped :
When rotating (non-locked) : ROTATE
When rotating (locked) :
m
If a motor does not rotate, or if the monitor display does not
change even if the motor is rotating, check the followings.
. Drum motor and the motor driver circuit (IC1 and others/MDR-
14G board)
. Drum FG/PG detector circuit (IC4 and others/MDR-14G board,
IC1 and others/SS-92G board)
. Reference signal (DVP_REF_FRM/CF) (DVP-41 board)
. Capstan motor and the motor driver circuit (IC102 and others/
MDC-13G board)
. Capstan FG detector circuit (IC201 and others/MDC-13G
board, IC1 and others/SS-92G board)
. Signal path between and the MDR-14G board and the MDC-
13G board
. Signal path between the MDC-13G board and the SS-92G
board
11-10
STOP
LOCK
SERVO CHECK MENU
C004:DRUM/CAP MOTOR STS
DRUM MOTOR
CAPSTAN MOTOR
: STOP
: STOP
HDW-F900R/V1 (E)