Replacement Of Board; Dd-161P) Board; Board - Sony EVI-D100 Service Manual

1-4. Replacement of Board

1-4-1. DD-161 (DD-161P) Board
1. Remove the pan cabinet (side). (Refer to Section 1-2-1)
2. Remove the pan cabinet (front). (Refer to Section 1-2-2)
3. Remove the pan cabinet (rear). (Refer to Section 1-2-3)
4. Remove the camera cabinet (upper/lower). (Refer to
Section 1-2-4)
5. Remove one screw, then disconnect the two flexible
flat cables from the two connectors on the DD-161

(DD-161P) board.

DD-161 board
(DD-161P)
Flexible flat cables
6. Attach the DD-161 (DD-161P) board in the reverse
order of steps 1 to 5.
1-6
M 2
DD-161 board
(DD-161P)
Connectors
1-4-2. MDR-17 Board
1. Remove the pan cabinet (side). (Refer to Section 1-2-1)
2. Remove the pan cabinet (front). (Refer to Section 1-2-2)
3. Remove the pan cabinet (rear). (Refer to Section 1-2-3)
4. Remove the camera cabinet (upper/lower). (Refer to
Section 1-2-4)
5. Remove the camera cabinet (front). (Refer to Section
1-2-5)
6. Remove the camera block. (Refer to Section 1-3)
7. Remove one screw, then remove the holder and MDR-

17 board.

8. Disconnect the two flexible flat cables from the two
connectors on the MDR-17 board.
Holder
2x3
MDR-17 board
Flexible flat cable
9. Attach the MDR-17 board in the reverse order of steps
1 to 8.
Flexible flat cable
Connectors
EVI-D100/EVI-D100P