S) Soft Brake Assembly Replacement - Sony HDCAM HDW-F900R Maintenance Manual

7-18. (S) Soft Brake Assembly Replacement

Replacement (Perform the part replacement according to the following
procedure.)
Removing the (S) soft brake assembly replacement
Installing the (S) soft brake assembly replacement
Adjustment after replacement
Capstan add-on recording adjustment
Note
If a tape hunts or slackens during the REW mode, replace the (S) soft brake assem-
bly.
Preparations
1. Turn off the main power.
2. Remove the front lid and outside panel assembly. (Refer to Section 1-4.)
3. Remove the cassette compartment. (Refer to Section 1-9.)
4. Check that the unit is in the unthreading-end state.
Tools
. Cleaning cloth : 3-184-527-01
. Cleaning fluid : 9-919-573-01
Removal
1. Removing the (S) soft brake assembly
replacement
Remove the two precision screws and the (S) soft
brake assembly.
7-66
Precision screws
P1.4 x 3.5
(S) soft brake
assembly
HDW-F900R/V1 (E)