Extending The Ss-92G Board - Sony HDCAM HDW-F900R Maintenance Manual

1-15-9. Extending the SS-92G Board

Required tools : SS-EXT assembly,
Flexible card wire (45 core, 250 mm)
(4 wires)
n
Life of flexible card wire will be significantly shortened if
it is folded. Be very careful not to fold the flexible card
wire.
1. Open the inside panel assembly.
(Refer to Section 1-5.)
2. Remove the DCP board assembly.
(Refer to Section 1-7-1.)
3. Remove the DVP board assembly.
(Refer to Section 1-7-2.)
4. Remove the harness clamp.
5. Remove the five screws and remove the dust protec-
tion cover.
6. Remove the flexible card wires from the connectors
(CN201 and CN202) on the SS-92G board.
CN201
CN202
Flexible card wires
SS-92G board
1-44
7. Remove the screw and remove the SS PC board retainer.
8. Remove the SS-92G board from the MB-1096 board.
9. Remove the flexible card wires from the connectors
(CN201 and CN202) on the MDC-13G board.
MDC-13G board
MB-1096 board
10. Connect the four optional flexible card wires (45 core)
to the connectors (CN101, CN102, CN201, CN202) on
the SS-EXT assembly.
Dust protection
cover
CN202
PSW2 x 5
SS-EXT
assembly
Harness clamp
CN202
CN201
Flexible card wires
CN102
CN101
CN201
SS-92G board
SS PC board
retainer
PSW2 x 5
Flexible card wires
(45 core)
Flexible card wires
(45 core)
HDW-F900R/V1 (E)