Sony HDCAM HDW-F900R Maintenance Manual page 265

10. Disconnect the flexible card wire from the connector
(CN117) on the MB-1096 board.
n
Life of flexible card wire will be significantly short-
ened if it is folded. Be very careful not to fold the
flexible card wire.
11. Remove the two precision screws. Remove the hole of
the WRR guide from the pin and remove the WRR
guide in the direction of the arrow.
12. Remove the two precision screws and remove the RX-
54G board.
n
Be careful not lose the connector retainer.
13. Disconnect the flexible card wire from the connector
(CN117) on the RX-54G board.
n
Life of flexible card wire will be significantly short-
ened if it is folded. Be very careful not to fold the
flexible card wire.
14. Install the new IF-794G board, HN-277G board and
RX-54G board by reversing the steps of removal.
HDW-F900R/V1 (E)
On the side of
Pins
the outside panel assembly
Holes
WRR guide
CN117
Flexible card wire
MB-1096 board
WRR guide
Connector retainer
RX-54G board
Flexible card wire
Precision screws
P2 x 4.5
Precision
screws
P2 x 3
WRR guide
6-33