Removing The Rm-201 Board; The Axm-33 Board - Sony HDCAM HDW-F900R Maintenance Manual

6-7-4. Removing the RM-201 Board

1. Disconnect the harness from the connector (CN1) on
the RM-201 board.
2. Remove the two precision screws, and remove the
RM-201 board.
6-7-5. Removing the SW-1309 Board and the
AXM-33 Board
1. Remove the two screws (M2 x 4), and remove the
SW-1309 board and the SW bracket.
2. Disconnect the harness from the connector (CN1) on
the SW-1309 board.
3. Remove the two screws (PSW2 x 5), and remove the
SW-1309 board from the SW bracket.
4. Remove the one screw (PSW2 x 5) and remove the
CNB bracket.
5. Remove the six precision screws (P2.6 x 5), and
remove the AXM-33 board in the direction of arrow B.
n
When removing the AXM-33 board, push down the
PUSH levers of the two AUDIO IN connectors
simultaneously in the direction of arrow A, and
remove the board in the direction of arrow B.
n
When attaching the AXM-33 board to the connector box,
push down the PUSH levers of the two AUDIO IN connec-
tors simultaneously, and pass it through the hole of the
connector box.
6-14
Precision screws
P2.6 x 5
SW bracket
SW-1309
board
PSW2 x 5
SW-1309 board,
SW bracket
CN1
M2x 4
Precision screws
P2.6 x 5
AUDIO IN connector
AXM-33 board
A
Fig. 1
PUSH lever
Connector box
Side view
Tweezers
Hole
PUSH lever Connector box
RM-201
board
CN1
PSW2 x 5
CNB bracket
AXM-33 board
B
B
Fig. 2
AXM-33 board
HDW-F900R/V1 (E)