10. Removing the MDC-13G board
(1) Disconnect the harness from the connectors
(CN505, CN506, CN507, CN510, CN511) on
the MDC-13G board.
(2) Remove the connector gard.
n
Depending on the time of production at the
factory, there are sets that have no connector
gard.
(3) Remove the 13 precision screws and remove
the MDC-13G board.
7-128
Connector on
the MDC-13G board (CN511)
Precision screws
P1.4 x 3.5
MDC-13G board
Precision screws
P1.4 x 3.5
CN510
CN505
CN507
MDC-13G board
Connector on
the MDC-13G board (CN506)
Connector gard
Precision screws
P1.4 x 3.5
HDW-F900R/V1 (E)