Sony HDCAM HDW-F900R Maintenance Manual page 543

A91 : MDC-13 BOARD CHANGE
This item performs the setting that enables saving the contents of the
backup RAM into the EEPROM (IC403) of the new replacement
MDC-13G board when the MDC-13G board is going to be replaced.
n
Perform this setting immediately before replacing the MDC-13G
board.
When this setting is performed, the contents of the backup RAM are
saved in the EEPROM at the first power-on after the MDC-13G board
is replaced.
1. Select "A91 : MDC-13 BOARD CHANGE " and press the rotary
encoder.
2. When the rotary encoder is rotated, NO changes to YES.
3. When the YES message appears, turn off the main power once.
4. Replace the MDC-13G board.
5. Turn on the main power.
n
For the replacement procedure of the MDC-13G board, refer to
"7-36. MDC-13G Board Replacement".
HDW-F900R/V1 (E)
OTHERS ADJUST MENU
A91:MDC-13 BOARD CHANGE
CHANGE : NO
OTHERS ADJUST MENU
A91:MDC-13 BOARD CHANGE
CHANGE : YES
TURN OFF POWER
11-43