6-10. Camera SW Ornamental Plate (3)
Replacement
n
The camera SW ornamental plate (3) is attached to the
inside panel assembly with a both-sided adhesive tape.
1. Insert a flat head (_) screwdriver tip between the
camera SW ornamental plate (3) and the inside panel
assembly. Remove the plate carefully starting with the
edge.
2. Clean the surface (the shaded portion
illustration) from which the camera SW ornamental
plate (3) is peeled off.
3. Peel the protection sheet off the new camera SW
ornamental plate (3) and attach it to the inside panel
assembly.
6-20
Inside panel assembly
shown in
Flat head (_)
screwdriver tip
Camera SW
ornamental plate (3)
Cleaning
HDW-F900R/V1 (E)