Sony HDCAM HDW-F900R Maintenance Manual page 146

SD DETAIL Display (Adjusting DETAIL of DOWN CON OUT)
* : Displayed only when the HKDW-702/902R is installed.
? 10 O SD DETAIL
SD DETAIL
SD DETAIL LEVEL :
SD CRISPENING
SD DTL WHT LIMIT:
SD DTL BLK LIMIT:
SD LEVEL DEPEND :
SD LV.DEPEND LVL:
SD DTL FREQ.
SD DTL H/V RATIO:
SD CROSS COLOR
Item
SD DETAIL
SD DETAIL LEVEL
SD CRISPENING
SD DTL WHT LIMIT
SD DTL BLK LIMIT
SD LEVEL DEPEND
SD LV.DEPEND LVL
SD DTL FREQ.
SD DTL H/V RATIO
SD CROSS COLOR
*1 : If the format is set to 24PsF/23.98PsF when the HKDW-702 is installed or 24PsF when the HKDW-902R is installed, the setting is
displayed as "_ _".
*2 : Displayed only when the format is set to 59.94i/29.97PsF when the HKDW-702 is installed.
4-30
: ON
0
: 0
0
0
ON
0
: 0
0
: 0
Setting Function
OFF/ON Turns ON/OFF the detail signal.
(_99 to 99) Sets the overall detail signal level.
(0 to 15) Sets the range of video signal amplitude to which the
detail signal is crispening.
(_99 to 99) Limits the white peak of the detail signal.
(_99 to 99) Limits the black peak of the detail signal.
OFF/ON Turns ON/OFF the level depend function. (This function
decreases the amount of detail signal when the video
signal amplitude is small.)
(0 to 15) Sets the range of video signal amplitude that is suppressed
by the level depend.
(0 to 3) Sets the frequency (thickness) of the H. detail signal.
(0 to 7) Sets the V. detail signal level only.
(0 to 15) Sets the cross-color suppression level.
* * * * *
*1
*1
*1
*1
*1
*1
*1
*1
*1, *2
*1
HDW-F900R/V1 (E)