Ctl Head Height Adjustment - Sony HDCAM HDW-F900R Maintenance Manual

8-2-3. CTL Head Height Adjustment

Tools
. HN-255 assembly :
. Alignment tape HR2-1A :
. Nut driver (for across : 4.5 mm) : 7-700-751-01
. Oscilloscope
. Skewer
Preparations
1. Turn off the main power.
2. Remove the front lid and the outside panel assembly. (Refer to Section 1-4.)
3. Remove the shoulder pad and the plate.
4. Connect the HN-255 assembly to the MDC-
13G board.
. 5-pin connector on the HN-255 assembly :
CN902/MDC-13G board
. 8-pin connector on the HN-255 assembly :
CN903/MDC-13G board
5. Connect an oscilloscope.
CH-1 : PB CTL/Circuit board on the HN-255
assembly
TRIG : SERVO CF/Circuit board on the HN-
255 assembly
6. Turn on the main power.
7. Insert the alignment tape HR2-1A.
8-32
A-8315-553-B
8-960-076-11
Screws
(with drop-safe)
P2 x 4
Plate
Shoulder pad
HDW-F900R/V1 (E)