Sony HDCAM HDW-F900R Maintenance Manual page 149

V MODULATION Display (Adjusting Temporary WHITE V SAW SHADING for LENS)
? 14 O V MODULATION
VMOD
MASTER VMOD
R VMOD
G VMOD
B VMOD
OUTPUT SELECT
Item
VMOD
MASTER VMOD
R VMOD
G VMOD
B VMOD
OUTPUT SELECT
* : RGB can be selected only when the Camcorder is used in the service mode.
n
In the MASTER VMOD and R/G/B VMOD, the lens extender position is displayed in the rightmost-end
of the menu items.
Blank : Extender OFF
EX : Extender ON
HDW-F900R/V1 (E)
: ON
EX: 0
EX: 0
EX: 0
EX: 0
: Y
Setting Function
OFF/ON Turns ON/OFF the V. modulation function.
(_99 to 99) Adjusts amount of the master V. modulation correction.
(All of the R, G and B V. modulation corrections are
controlled.)
(_99 to 99) Adjusts amount of the R V. modulation correction.
(_99 to 99) Adjusts amount of the G V. modulation correction.
(_99 to 99) Adjusts amount of the B V. modulation correction.
*
Y/R/G/B/RGB Selects the video signal that is output from the TEST OUT
and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when VBS is selected
in the SD REAR BNC OUT of the OUTPUT SEL display (of
the OPERATION menu) and SD is selected in the TEST OUT
SELECT.) The output signal returns to the Y-signal without fail
at power-on.
4-33