ADF DRIVE GEARS
1. Remove the Cover TX side F. (See page 5-10, 5-11)
2. Remove the Cover TX side B. (See page 5-8, 5-9)
3. Remove the Bracket motor ADF. (See page 5-33)
4. Remove the APS bracket. (See page 5-38)
5. Remove the Guide inner A. (See page 5-35)
6. [1] Remove the Gear 24/47.
7. [2] Remove the Gear 18/55.
8. [3] Remove the Gear 40 0.6B.
9. [4] Remove two Gear 59 0.5.
10. Remove one E-ring, and then remove [5] the Gear 27 0.5.
11. Remove one E-ring, and then remove [6] the Gear 27 0.5 ONEWAY.
[3] Gear 40 0.6B
[6] Gear 27 0.5 ONEWAY
ANA03
[4] Gear 59 0.5
[1] Gear 24/47
[4] Gear 59 0.5
ANA04
[5] Gear 27 0.5
5-37
5-37
[2] Gear 18/55