Basic Ip Routing Commands; Address-Family Ipv4; Address-Family Ipv6 - HP 5920 Series Command Reference Manual

Basic IP routing commands

address-family ipv4

Use address-family ipv4 to create a RIB IPv4 address family and enter RIB IPv4 address family view.
Use undo address-family ipv4 to remove a RIB IPv4 address family and all configurations in the view.
Syntax
address-family ipv4
undo address-family ipv4
Default
No RIB IPv4 address family is created.
Views
RIB view
Predefined user roles
network-admin
Examples
# Create a RIB IPv4 address family and enter RIB IPv4 address family view.
<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv4
[Sysname-rib-ipv4]

address-family ipv6

Use address-family ipv6 to create a RIB IPv6 address family and enter RIB IPv6 address family view.
Use undo address-family ipv6 to remove a RIB IPv6 address family and all configurations in the view.
Syntax
address-family ipv6
undo address-family ipv6
Default
No RIB IPv6 address family is created.
Views
RIB view
Predefined user roles
network-admin
1