Group (Ipv6 Address Family View); Import-Route (Ipv6 Address Family View/Ipv6 Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] filter-policy 3000 import

group (IPv6 address family view)

Syntax
group ipv6-group-name [ internal | external ]
undo group ipv6-group-name
View
IPv6 address family view
Default level
2: System level
Parameters
ipv6-group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
internal: Creates an IBGP peer group.
external: Creates an EBGP peer group, which can be a group of another sub AS in the
confederation.
Description
Use group to create a peer group.
Use undo group to delete a peer group.
An IBGP peer group will be created if neither internal nor external is selected.
Examples
# Create an IBGP peer group named test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv6-family
[Sysname-bgp-af-ipv6] group test
import-route (IPv6 address family view/IPv6 BGP-VPN
instance view)
Syntax
import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ]
undo import-route protocol [ process-id ]
View
IPv6 address family view, IPv6 BGP-VPN instance view
372