If-Match Ipv6 - HP FlexNetwork 3600 v2 Series Command Reference Manual

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip ipv6-prefix to display the statistics of the specified IPv6 prefix list. If no IPv6 prefix
list is specified, the statistics of all IPv6 prefix lists will be displayed.
Examples
# Display the statistics of all IPv6 prefix lists.
<Sysname> display ip ipv6-prefix
Prefix-list6 abc
Permitted 0
Denied 0
index:
index:
Table 96 Command output
Field
Prefix-list6
Permitted
Denied
Index
Permit
::/1
ge
Le

if-match ipv6

Syntax
if-match ipv6 { address | next-hop | route-source } { acl acl6-number | prefix-list
ipv6-prefix-name }
undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ]
View
Routing policy view
Default level
2: System level
Parameters
address: Matches the destination address of IPv6 routing information.
next-hop: Matches the next hop of IPv6 routing information.
route-source: Matches the source address of IPv6 routing information.
acl acl6-number: Specifies the number of an IPv6 ACL for filtering, in the range of 2000 to 3999 for
address, and 2000 to 2999 for next-hop and route-source.
prefix-list ipv6-prefix-name: Specifies the name of a IPv6 prefix list for filtering, a string of 1 to 19
characters.
10 permit
20 permit
Description
Name of the IPv6 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Index number of the prefix list
Match mode of the item: permit or deny
IPv6 address and prefix length for matching
greater-equal, the lower prefix length
less-equal, the upper prefix length
::/0
::/1
435
ge 1 le 128