System Image Handling Task List; Displaying System Image Information - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

System image handling task list

To load and maintain system images perform the tasks described in the following sections:
•

Displaying system image information

• Copying system images from a network server to Flash memory (see
• Copying driver software from a network server to Flash memory (see

Displaying system image information

This procedure displays information about system images and driver software
Mode: Administrator execution
Step Command
1 show version
Example: Display system image information
The following example shows the information that is available for a SmartNode 2000 series device with an
optional IC-4BRV interface card mounted in slot 2.
SN#show version
Product name
Software Version : SmartWare R2.00 BUILD22031
Supplier
Provider
Subscriber
Information for Slot 0:
SN2300 (Admin State: Application Started, Real State: Application Started)
Hardware Version : 1, 1
Serial number
PLD Version
Software Version : SmartWare R2.00 BUILD22031
Information for Slot 1:
this Slot is empty
Information for Slot 2:
IC-4BRV (Admin State: Application Started, Real State: Kernel Started)
Hardware Version : 1
PLD Version
Software Version : Build 24026, min required : Build 24027
Loader Version
Information for Slot 3:
this Slot is empty

System image handling task list

Lists the system software release version, information about optional interface
cards mounted in slots, and other information.
: SN2300
:
:
:
: 100000021579
: 23010204h
: 170001h
: Build 39, min required: Build 39
6 • System image handling
page 74)
page 75)
Purpose
73