Q.sig Pbx Networking - Patton electronics SmartNode Series Software Configuration Manual

24 • CS interface configuration
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
02:47:59 SR
SN(ctx-cs)[switch]#

Q.SIG PBX networking

The example in figure 60
neling and to simplify the routing configuration every H.323 interface needs a unique port address.
306
> Resolving interface references within routing tables...
> Resolving routing table references within interfaces...
> Classifier is resolving sessionrouter references...
> Loading and linking complete...
> Following voice interfaces have been loaded:
> callapp
> IpBackbone101
> IpBackbone102
> ISDNPhone101
> ISDNPhone102
> Following routing tables have been loaded:
> Following functions have been loaded:
> Following number replacement tables have been loaded:
shows a Q.SIG PBX network scenario. To separate different tunnels for Q.SIG tun-
SmartWare Software Configuration Guide
Examples