Linux box WRAC (server) (Windows Remote Application Client) Network Network diagram for FS6300 NMS Figure 1. 3.0 Log into the Linux box Log into the Linux box with the following information: Username: patton Password: patton ForeSight 6300 NMS Quick Start Guide...
Page 3
If the resulting value is 0, IP forwarding is not activated. You will need to activate the service using the following command: #sudo sysctl -w net.ipv4.ip_forward=1 Or, you can also use the command below: #sudo echo 1 > /proc/sys/net/ipv4/ip_forward ForeSight 6300 NMS Quick Start Guide...
Right-click on Grant Permission and select Run. In the resulting pop-up window [FS6300 Grant Permission Window], enter the IP address of the WRAC workstation–192.168.254.2. Press Grant. Verify that the IP address is successfully granted. Close the window. ForeSight 6300 NMS Quick Start Guide...
Application Client. 10.0 Additional information For detailed information about installing, configuring, operating, and troubleshooting, refer to the ForeSight 6300 NMS User Manual and the ForeSight 6300 NMS Administrator’s Reference Guide available online at www.patton.com/manuals/FS6300.pdf. ForeSight 6300 NMS Quick Start Guide...
For additional service and support information, refer to the “Contacting Patton for assistance” chapter Note of the ForeSight 6300 NMS User Manual available online at www.patton.com/manuals/FS6300.pdf. Warranty, Trademark, & Compliance Information For warranty, trademark and compliance information, refer to the ForeSight 6300 NMS available User Manual online at www.patton.com/manuals/FS6300.pdf.