Configuration Of Telnet Sessions - Patton electronics SmartNode Series Software Configuration Manual

8 • Basic system management
Configuration of Telnet sessions
In certain cases it may be desirable to change the settings of the current Telnet session.
Mode: System
Step
1 [ name ] (sys)#terminal height
[ name ] (sys)#terminal idle-time-logout After 30 minutes without user input the current Telnet
2
[ name ] (sys)#terminal more
3
4 [ name ] (sys)#terminal width
100
Command
SmartWare Software Configuration Guide
Purpose
Configures the terminal height.
session is closed. If longer session periods are
required (logging/debugging) this command allows
to increase the session timeout up to 136 years.
Enables pausing of display for commands which pro-
duce more output than the current terminal window
can display at once.
Configures the terminal width.
Basic system management configuration task list