Operator_Exec - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Command syntax is illustrated by an example in
This command summary is valid for SmartWare, Release 2.20, Build 22126. Commands in future SmartWare
releases or builds may be different. The information provided in this chapter is subject to change without notice.

operator_exec

dropin
ping <address> [<number> ] [timeout <seconds> ] [packet-size <packet_size> ] [ttl
<ttl> ]
dns-lookup <text_hostname>
traceroute <ip_host> [probe-count <probe_count> ] [timeout <seconds> ] [destination-
port <port_number> ] [min-ttl <min_ttl> ] [max-ttl <max_ttl> ] [verbose ]
[packet-size <packet_size> ] [mtu ]
[no] call {(<callkey> {(dial <interface> [<called-party> [<calling-party> ] ] ) |
(overlap <called-party> ) | accept | drop | (display <display-data> ) | (keypad
<keypad-data> ) | (user <user-data> ) | hold | (suspend [<parkcode> ] ) |
retrieve | (resume [<parkcode> ] ) } ) | autoaccept | (bearer-capability {audio
| speech | digital } ) | ({called-numbering-plan | calling-numbering-plan }
{e164 | private } ) | ({called-type-of-number | calling-type-of-number }
{unknown | national | international | subscriber } ) }
clear
show call {sessions | config } [<detail> ]
[no] debug call [<detail> ]
show port {pstn | isdn } [<detail> ]
show clock
show uptime
show ip route
show dsp {<slot> | (statistics <slot> ) | (channel statistics <slot> ) | (sw-version
<slot> ) | (test-result <slot> ) }
show profile voip [<show_name> ]
SmartWare 2.20 command summary
figure 83.
Figure 83. EBNF syntax
B • Configuration mode overview
419